Wixx PRO Roof Coating Aluminium

Wixx PRO aluminium roof coating provides excellent waterproof finishing for various roofing materials. This high-quality aluminium roof coating, based on bitumen, special additives and aluminium particles, creates a reflective and flexible layer that is resistant to all weather conditions. Therefore, the roof covering not only protects against moisture, but also ensures a longer lifespan of your roof by reflecting sunlight, keeping the roof cool in summer.

Properties

• Flexible and waterproof after application
• Reflects sunlight, keeps the roof cooler in summer
• Protects against UV radiation and prevents sun damage
• Increases the lifespan of the roof
• Repairs small cracks, holes and gaps
• Suitable for different roofing materials such as bitumen, concrete, metal and roof tiles

Application areas

• Wixx PRO aluminium roof coating is ideally suited for protecting roofs:
• Bitumen roofs
• Concrete roofs
• Metal roofs
• Roof coverings of slate and roof tiles
• Roofs exposed to extreme weather conditions and UV radiation

Application
Make sure the substrate is clean, dry, and free from moss, algae, dust, and loose particles. If necessary, degrease the surface with Wixx Super Degreaser and allow it to dry completely.
Then first apply Wixx PRO Quickprimer Dakcoating Bitumen as a primer. This primer ensures optimal adhesion of Wixx PRO Dakcoating Aluminium to the substrate. Allow the primer to dry thoroughly before applying the roof coating.
Stir Wixx PRO Dakcoating Aluminium thoroughly before use with a metal mixer to ensure the aluminium particles are evenly distributed throughout the product. Then apply the coating evenly in thin layers of approximately 0.5–1.0 mm.
Application temperature: minimum +5°C and maximum +30°C.

Application
Apply the aluminium roof coating by pouring it onto the roof and rolling or spreading it evenly with a roller, brush or broom. Ensure the coating is distributed evenly. Additionally, use multiple thin layers for the best protection. Coverage: 1 to 2m² per kg per coat

Thinning/Cleaning:
Wixx PRO roof coating can be thinned and cleaned with Turpentine.

Drying time
Walkable: after approximately 8 hours at 20°C
Fully trafficable: after approximately 24 hours at 20°C

Safety and health
First ensure adequate ventilation during application
Then wear suitable gloves and a mask
In any case, avoid contact with skin and eyes, and use a respiratory mask with limited ventilation