Wixx 2K Epoxy AQ 750 Betoncoating

Wixx 2K Epoxy AQ 750 concrete coating is a 2-component, completely solvent-free, water-based, low-odour and user-friendly concrete paint for wear-resistant floor finishes. The product-specific chemical composition results in safe application and a very good wear-resistant floor finish with excellent adhesion. Therefore, the unique composition results in a plasticiser and chemical-resistant floor finish with optimal adhesion, suitable for all mechanically stressed surfaces.

This concrete coating also adheres excellently to metal and wood. Ideal for garages, retail spaces, showrooms, living rooms, kitchens, laundry rooms and similar applications. WIXX 2K Epoxy AQ 750 concrete coating is a high-quality concrete paint that is safe to use.

General product properties Wixx 2K Epoxy AQ 750 concrete coating

• Low odour
• Slightly filling
• Mixing ratio A:B = 4:1 (parts by weight)
• Complies with occupational health and safety standards for professional indoor use
• Good flow properties
• Very easy to apply

Properties

• Satin finish
• Pot life is approximately 60 minutes
• Drying time is approximately 16 to 24 hours
• Recoatable after approximately 24 hours
• Light traffic after 48 hours
• Fully trafficable after 72 hours
• Important: the floor is only chemically cured after 96 hours and can only then be cleaned chemically
• Coverage is approximately 5m2 per litre, depending on the surface
• Ratio is 4:1
• Available in 25 standard colours and all custom colours. PLEASE NOTE: Custom colours cannot be exchanged.

Surface preparation:
The surface must first be degreased with Wixx Super degreaser and then cleaned with clean water. It is important that after degreasing and rinsing you allow the floor to dry thoroughly.

Primer:
We always recommend applying a coat of Wixx 2K Aqua Primer first. This removes the absorption from the substrate and optimises adhesion. The Wixx 2K Aqua Primer is a transparent water-based primer.

Application:
Wixx 2k Epoxy AQ 750 concrete coating can be applied with roller, brush or airless spray. If you use spray, dilute 10% with water. Clean very thoroughly with water after use.

Thinning/Cleaning
Wixx 2K Epoxy AQ 750 concrete coating may be diluted with a maximum of 10% water. Can be cleaned with water.