Wixx Universal Wood Oil UV+

Wixx wood oil universal UV+ ensures a natural appearance. The beautiful, warm appearance of the wood is lost due to weather conditions if you do not treat it in time. It becomes dirty and grey. The solution for this is therefore wood oil UV+ from Wixx, which contains no solvents and is thus less harmful to the environment.

This wood oil also dries quickly, provides long-lasting, water-repellent protection and prevents greying and soiling. It has been specially developed for exterior applications of various wood types. The special composition based on special oils then ensures good penetration and adhesion; flaking is ruled out. The natural character and colour are preserved by these natural oils.

Properties

• Easy to apply
• Moisture-regulating
• Transparent
• Good film thickness
• Satin matt finish
• Based on natural oils
• No long-lasting unpleasant odour
• Solvent-free
• Coverage approximately 8 to 10m2 per litre
• Available in 7 different colours

Instructions for use
The substrate must first be dry and clean. Highly absorbent surfaces must be treated until they are saturated. The excess wood protection oil must then be wiped off with a cloth. Do not treat wood too early in spring. It is best to let the wood dry in the sun.

Preparation
Stir the wood oil thoroughly from the bottom and allow it to reach room temperature. Apply between 5°C and 25°C.

Application
1. Apply the wood oil in the lengthwise direction of the wood for a good finish. Work in sections or board by board.
2. Then allow the oil to penetrate for 10 to 15 minutes.
3. To prevent film build-up, buff out excess oil with a lint-free cloth until the wooden surface feels dry to the touch.