Wixx Belgian Carbolineum

Wixx Belgian carbolineum is applied to both untreated as well as rough and fine sawn wood. Before starting the treatment with this carbolineum, you must ensure that the wood is thoroughly dry.

This carbolineum is also applied to wooden bulkheads, windmills, tarred sheds, posts and fences, garden wood, pergolas, mooring posts and railway sleepers. Wixx Belgian traditional wood preservative can also be excellently applied to aged or weathered wood.

Properties

• Penetrates deep into the wood
• Good water resistance
• Dust-dry after 2 hours
• Recoatable after 5 hours
• Application temperature 5 to 30°C
• Satin finish
• Coverage: approximately 10m2 per litre

Instructions for use
The substrate must first be dry, dust and grease-free. Remove loose parts. Sanding is not necessary, only when you desire a smooth result. Apply Wixx wood preservative with a flat brush or stippling brush and for a good finish apply in the lengthwise direction of the wood. Only apply the next coat after the previous coat has completely penetrated and dried. We then recommend applying 2 coats.

Application
Wixx Belgian wood impregnator can be applied with roller, brush or airless spray.
If you use airless spray, dilute 5% with Wixx turpentine/white spirit.

Thinning/Cleaning
Wixx Belgian wood preservative can be thinned and cleaned with Wixx turpentine/white spirit.

Primer
For untreated surfaces we therefore always recommend applying 2 or 3 coats of Wixx Belgian wood preservative.