Wixx PRO Bitusol Black

Wixx PRO Bitusol has been specially developed for preserving concrete and stone-like structures. Due to its high resistance to acids, urea and inorganic salts, this bitusol is primarily applied in manure cellars, water basins and livestock feed silos.
Ideal for protecting concrete. Has high resistance to acids, urea and inorganic salts. Provides long-lasting protection against corrosion and moisture. Product remains elastic and does not harden. Has very good water-repellent properties.

Properties:

• Semi-gloss finish
• High resistance to acids and salts
• Long-lasting protection against corrosion and moisture
• Elastic properties
• Suitable for exterior application
• Coverage: approximately 4m2 per litre

Use:

Bitusol can be easily applied using a brush, roller or spray gun. At a temperature of 20°C, the film is touch-dry after 4 hours and fully handleable after 8 hours. Do not apply the product at a temperature below 0°C. Therefore ensure a dry, grease-free and dust-free substrate. The product can only be thinned using our special thinner. Depending on the desired layer thickness, we recommend applying the product in 2 to 3 coats.

Application:
Wixx PRO Bitusol can be applied with roller, brush or airless spray.
Important: when using airless spray, thin 5% with Wixx Turpentine/White Spirit.

Thinning/Cleaning:
Wixx PRO Bitusol can be thinned or cleaned with Wixx Turpentine/White Spirit.

Primer:
For untreated surfaces we always recommend 2 coats of Wixx PRO Bitusol.