Wixx PU Block Pave Sealer

UV-resistant 100% transparent Creates a wet-look effect

From€ 39,95 (including 21% VAT)

Liters

10L
2.5L
20L
5L

Clear

In stock. Ordered before 3 p.m., shipped the same day

Planning a large painting project?

Request a quote.

Request a quote

Request advice

Description

Wixx PU Block pave sealer is for protecting patio tiles and pavers against dirt, green deposits and moisture.
This specially developed sealer is a clear transparent coating layer for sealing and protecting paving. Wixx PU Block pave sealer is applied on patios, driveways and terraces and prevents soiling, greening and greying due to weather conditions. It is therefore recommended to apply 2 coats, so that your tiles are really well sealed.

Properties

Impregnating
UV resistant
100% Transparent
Satin finish
Scratch and wear resistant
Colourless
Fast-drying: 8 hours at 20 degrees
Coverage is approximately 6 to 8 m2 per litre, depending on the substrate

Preparation
It is recommended to first thoroughly clean the substrate with Wixx Super Degreaser and a pressure washer. Then allow to dry thoroughly.

Application
Wixx PU Block pave sealer can be applied with roller, brush or airless spray.
If using airless spray, thin 5% with Wixx PU Thinner.

Thinning/Cleaning
Wixx PU Block paving sealer can be thinned and cleaned with Wixx PU Thinner.

Primer
A primer is not necessary. However, it is recommended to apply at least 2 coats of Wixx PU Block pave sealer for an optimal result.

Specifications

Liters	10L, 2.5L, 20L, 5L
Colour	100% Transparent
Coverage	Transparent
Application	For indoor use, For outdoor use
Base	Turpentine-based
Degree of gloss	Silk Gloss