Wixx Wood Impregnator UV+

Wixx wood impregnator UV+ is a fast-drying turpentine-based coating that serves as the first base layer for transparent or opaque paintwork. This wood impregnator is ideally suited as a first coat on wood, as a base for transparent or opaque paintwork. Wixx wood impregnator also penetrates deep into the wood surface and promotes the adhesion of the finishing coat. Furthermore, this wood impregnator is water-repellent, has high sealing capacity, is universally recoatable after drying and extends the lifespan of wood. Because this wood preservative is colourless, it is therefore extremely suitable for finishing with a transparent stain.

Properties

• Ready to use
• Good filling properties
• Good adhesion
• Moisture-regulating
• Nourishes and protects
• Strong impregnating effect
• Dust-dry after 6 hours
• Recoatable after 24 hours
• Coverage is 14m2 per litre
• Satin finish

Instructions for use
The substrate must first be dry and clean. Highly absorbent surfaces must be treated until they are saturated. The excess impregnating agent must then be wiped off with a cloth. Do not treat wood too early in spring. It is best to let the wood dry in the sun.

Preparation
Stir Wixx wood preservative UV+ thoroughly from the bottom and allow it to reach room temperature. Apply between 5°C and 25°C.

Application
1. Apply Wixx wood preservative UV+ in the lengthwise direction of the wood for a good finish. Work in sections or board by board.
2. Then allow the impregnating agent to penetrate thoroughly.
3. To prevent film build-up, buff out excess oil with a lint-free cloth until the wooden surface feels dry to the touch.