Wixx Hardwood Oil UV+

Wixx hardwood oil UV+ is a formula based on various vegetable oils for the annual protection and maintenance of your wooden components. This hardwood oil has a very high yield and solids content, achieving excellent coverage with the first coat. Also protects teak and bankirai wood, among others, for extended periods against soiling or greying. Wixx hardwood oil is therefore very easy to apply.

Properties

• Protects against greying
• Low odour
• Wood grain remains visible
• Non-yellowing
• Pleasant to apply
• Fast-drying
• Coverage approximately 8m2 per litre
• Available in 7 colours: Clear | Natural, Bankirai, Dark Oak, Teak, Grey, Anthracite and Black

Use
The substrate must first be dry and clean. Highly absorbent surfaces must be treated until they are saturated. The excess tropical wood protection oil must then be wiped off with a cloth. Do not treat wood too early in spring. It is best to let the wood dry in the sun.

Preparation
Stir the hardwood oil thoroughly from the bottom and allow it to reach room temperature. Apply between 9°C and 25°C.

Application
1. Apply the tropical wood protection oil in the lengthwise direction of the wood for a good finish. Work in sections or board by board.
2. Then allow the oil to penetrate for 10 to 15 minutes.
3. To prevent film build-up, buff out excess oil with a lint-free cloth until the wooden surface feels dry to the touch.